What is the recovery ratio?
The recovery ratio is the proportion of impurities or pollutants that are removed from water by a purifier. For example, if you had 1 litre of muddy water and wanted to remove 3g of dirt, your recovery ratio would be 3/1=3g. If you then desired to remove 60 gm of dirt from this same 1 litre of
Image source: https://www.amazon.com/
water, your new recovery ratio would be 60/3=20gm. Your original intention for the purifier was to remove exactly 3 grams in order to have "pure" water, but because it couldn't meet that target level after trying twice (because it's impossible!), you ended up with 20 grams instead.
Image source: https://www.flipkart.com/
So what is my recovery ratio?The Mi smart water purifier has a recovery ratio of approximately 98-99%. This means that it can remove 98-99% of pollutants and impurities from your water, leaving behind only 2-3% of contaminants.
Image source: https://www.smartprix.com/
The graph below shows the results for the removal of numerous pollutants in relation to the recovery ratio. As you can see, this particular purifier has pretty much taken care of everything!
Image source: https://www.flipkart.com/
What does the recovery ratio mean to me from a practical viewpoint?Let's say you were trying to remove Giardia from your water. Currently, if you wanted to simply use a filter and wait for months (or even years) to see any results, the recovery ratio might be a difficult selling point. But in our experience,
Image source: https://www.snapdeal.com/
purifying water with the Mi smart water purifier is like having a filter on your shower head. The purifier works on its own to remove infectious diseases such as Giardia from your water, but it's not always 100% effective every time.
Image source: https://www.reliancedigital.in/
In this case, we recommend keeping the purifier as close to 100% of working as possible. That is, don't let the purifier run out of water and then refill it. Refilling Mi Smart Water Purifier
Image source: https://www.shopclues.com/
What is frequency of refill?If the purifier has been used to produce one litre of dirty water and has then produced a litre and a half of clean water,
Image source: https://rtings.in/
you should refill the purifier immediately. When you do this, you will be replenishing the existing volume of clean water, as that was only half full in the first place. By doing this, you prevent any bacteria from growing or multiplying in your purifying system and in so doing, extend its life expectancy significantly.
Image source: https://www.amazon.com/
This means that you get the most out of your purifier in terms of cleaning. If you wait for the water to reach a certain level and then refill,
Image source: https://www.amazon.com/
it is probable that you will end up with less clean water if there are any leftovers from previous uses; which brings us back to our original topic - how often should I refill the Mi smart water purifier?
Image source: https://www.flipkart.com/
How often should I refill the Mi smart water purifier?The amount of clean water generated by this device varies between 1.5-2 litres per cycle.
Image source: https://paytmmall.com/
Note that each cycle produces 1.5-2 litres of clean water. We recommend that you refill the purifier every time it has produced 100 ml of clean water, or when the LED has turned blue.
Image source: https://www.smartprix.com/
When should I refill my Mi smart water purifier?You should refill your purifier a maximum of twice a day and only if the LED turns blue.
Image source: https://www.flipkart.com/
This is because the water produced by this device is not penetrative and requires time for the water to be absorbed into your body.
Image source: https://www.snapdeal.com/
Comments
Post a Comment